• IC-F9511HT
  • IC-F9511HT Side
  • IC-F9511HT Back

Icom IC-F9511HT High-Power VHF Mobile Radio, with kepad


List price: $3,050.00  


You save: $600.05 (20%)


512 channels
P25 CAP-compliant, supports conventional and trunked P25 operation, qualifies for P25 grant funding
  • 110 Watts power output (remote mounting kit recommended)
  • Full P25 operation out of the box, nothing else to buy
  • Wide/narrow band FM, P25 and trunked P25 operation
  • Front panel keypad for direct channel entry, external speaker standard
  • Large and easy to read LCD dot-matrix display
  • Very sophisticated and robust operation
  • Rich set of scanning and priority channel features
  • Built-in 2-tone encode and decode
  • Full MDC Signaling with 500 unit alias list
  • (RMK-2) and dual head remote mounting kit (RMK-4) are available
  • 136-174 MHz
High Power Mobile for the First Responder!
Ready for: P25 conventional, P25 trunking and analog conventional. All in one radio!


P25 Conventional & Trunking Features

P25 VHF Conventional and Trunking

The IC-F9511HT comes with P25 VHF conventional and trunking capabilities. You can assign individual channels to analog conventional, P25 conventional or P25 trunking, all within one radio.


The IC-F9511HT conforms to standard specifications for TIA/EIA -102, CAAB, Digital C4FM Transceiver Performance Recommendations. Provides interoperability with other brand P25 equipment for public safety applications.

Digital/Analog mixed mode operation

The mixed mode operation allows you to detect and receive both analog FM and P25 digital modes and to transmit either mode depending on programming.

Individual ID and talkgroup ID

The IC-F9511HT has a 100 individual ID and 250 talkgroup ID memories. Use the display to visually select the person or group you’re going to call.

Optional AES/DES encryption

The IC-F9511HT provides AES and/or DES encryption for secure conversation with the optional UT-125 AES/DES encryption unit or UT-128 DES encryption unit.

OTAR (Over-the-Air-Rekeying)

The IC-F9511HT supports P25 OTAR and trunked OTAR for changing encryption keys over the air.

Enhanced vocoder ready

Using the DVSI’s AMBE+2™ vocoder, the IC-F9511HT is enhanced vocoder ready.

110W of powerful RF output

A full 110W of output power is available for reliable long distance communication. A large heat sink provides effective cooling mechanism allowing continuous duty cycle operation (20% duty cycle transmission).

IP54 dust and water resistance

The controller and RF unit have IP54 dustprotection and splash resistance allowing it to be used in wet and dusty conditions.

Compact “letter size” RF unit

The IC-F9511HT’s RF (main) unit dimensions are only 175 (W) × 60 (H) × 279 (D) mm (67⁄8 × 23⁄8 × 1031⁄32 in), so the RF unit can be fit into a “letter size” console box.

Optional dual-head controller*

By installing the optional RMK-4 with a separation cable, the IC-F9511HT can be made a two controller “Dual-head” configuration. While a dual-head operator is communicating using one of the controllers, the other operator can monitor incoming and outgoing audio. Also, the radio can be used as an intercom between controllers.
* Optional dual-head separation kit, separation cable, microphone and speaker are required.

512 memory channels, 128 zones

Up to 512 memory channels can be divided into 128 memory zones, allowing you flexible channel and communication group management. The CTCSS and DTCS encoder and decoder* are also built-in to set up your own talk groups.
* Analog mode only.

Dot matrix, multi-function LCD

With a high contrast dot matrix display, upper and lower case characters can be easily distinguished. The display shows 12 characters by 2 lines. LCD backlight is standard.

9-pin external speaker connector

The IC-F9511HT has a 9-pin speaker connector with a 15W (typ.) audio amplifier for connecting the SP-30 external speaker, horn honk and ignition sensing line, etc,. When an external loud speaker is connected, the RX speaker function allows you to relay the received audio over the loud speaker.

Programmable accessory connector

The IC-F9511HT has a D-SUB 25-pin ACC connector for connecting external devices. It has reserved pins for programming to input operating channels, turn on/off functions and output received audio.

Tactical group function

The tactical group function allows you to copy memory channels to the tactical zone and temporarily regroup memory channels. Using the optional zone copy cable, memory channels in the tactical zone can be transferred from a master radio to other radios.

Abundant scanning functions

The dual priority scan monitors two primary channels alternately, while scanning other channels. The mode dependent scan function automatically changes the scan list according to the operating channel setting. The talk back function with timer beep, TX channel and cancel channel settings allow you to preset the transmission channel when you push the PTT button during a scanning operation or cancel the scanning.

Radio stun/kill and Power-on password function

The radio stun/kill function* disables a lost or stolen radio over the air, eliminating security threats from undesired listeners. The power-on password** prevents unauthorized people from turning on the radio.
* P25 digital mode only. ** The power-on password function is not compatible with the RMK-4.

Optional external speaker SP-30

Newly designed external speaker, SP-30 offers 15W* (typ.) of high level audio with the IC-F9511HT for improved operation in noisy environments.
* Rated input of the SP-30 is 20W.

Other features

• Wide frequency coverage (136–174MHz)
• HM-148G self-grounding microphone supplied with the IC-F9511HT
• FM wide/narrow channel spacing*
• Built-in audio compander*
• Built-in inversion type voice scrambler*
• NTIA VHF specification compliant
• Talk around function
• DTMF autodial*
• Microphone hanger action (On hook scan and off hook monitor)
• 2-Tone encoder and decoder* and MDC 1200 compatible* (Available in future)
* Analog mode only