• IC-F60V
  • IC-F60V Side
  • IC-F60V Top

Icom IC-F60V (with loud audio, vibrate, voice storage) UHF Portable Radio


List price: $554.00  


You save: $104.05 (19%)


128 channels, 8 zones
Ideal for fire safety professionals and volunteers. Qualifies for pager grant funding.
  • Combines full Minitor V® stored-voice pager capability and a 2-way radio in one compact, waterproof unit
  • Minitor® III, IV, & V compatible
  • 8 minutes stored voice, with vibrate alert
  • Narrow-band capable
  • PL & DPL with squelch tail elimination
  • Built tough, yet compact
  • Optional gain antenna for great fringe performance
  • Wide range of chargers available
  • 1900 mAh waterproof Li-Ion battery
Never miss important calls with loud audio, vibration alert and voice recorder!

Vibration alert function

When a pre-programmed 2-tone/5-tone code or call from a specific user (MDC mode only) is received, the radio vibrates powerfully enough to be felt through heavy clothing.

8 minute voice recorder

When a pre-programmed 2-tone/5-tone code or a SelCall (MDC mode only) is received, the voice recorder automatically starts recording the incoming message. You will not miss an important call even when you are temporarily away from the radio. You can manually start recording incoming calls and also your own message. It records up to a maximum of 8 minutes (Or up to 48 calls of 10 sec. recording time).
“*” icon on the display shows you have a new message

700mW audio output

The IC-F50V series delivers a loud 700mW* audio output with the built-in BTL amp. The built-in audio compander provides clear, low noise communications. Improved bass characteristics also betters the audio quality.
* Typical with internal speaker.

Lone worker function for remote check in

When the radio is not operated for a preset period (1 to 255 min.), the radio sounds a beep and requires you to push any button. If the radio is not operated for a preset time (1 to 255 sec.), an emergency signal automatically transmits and informs your co-worker or dispatcher that something may have happened to the individual worker.

IP67, dust-tight and waterproof protection

The IC-F50V series has outstanding protection against dust and water that is equivalent to IP67. The ICF50V series can withstand submersion in 1m depth of water for up to 30 minutes and has dust-tight construction that prevents the ingress of dust.

Most popular signalings built-in

Use the built-in CTCSS, DTCS, 2-Tone, 5-Tone and MDC signaling capabilities to set up your talk group or selective calling. The IC-F50V series can decode ten 2-Tone codes or eight 5-Tone codes on a channel. When a matched tone is received, the following actions are programmable for each code.
• Bell icon
• Answer back call
• Beep sound
• Auto transmit
• Radio Stun/Kill/Revive
• Voice recorder
• Vibration alert

MDC 1200 Compatible

The following selective calling and ANI features are available with the built-in MDC signaling.
• Radio check
• Caller ID
• Call alert
• SelCall
• Emergency, emergency mic monitoring
• 500 Aliases
• Status/message
• Radio stun/revive

Mode dependent scan

In the mode dependent setting, the scanning setting is dependent on the operating channel. When you change the operating channel, the scanning list automatically changes to the operating channel setting. It is convenient when you move to a different operating area and change an operating channel, you don’t have to change the scanning setting.

Enhanced scanning

The Tx channel while scanning can be programmed per scanning list. The talk back function allows you to transmit on the channel detected after scanning resumes after a preset time, prior to the Tx channel setting. The nuisance delete function temporarily deletes a busy channel from the scanning list. Backlight at scan stop automatically turns on the LCD backlight when the scan stops.

Compact body

56(W)×97(H)×36.4(D) mm* compact body with durable, dependable construction, has been tested to MIL standard specifications. * 27⁄32(W)×313⁄16(H)×17⁄16(D) in

Li-Ion battery pack

The large capacity 1700mAh Lithium-Ion (Li-Ion) battery pack, BP-227 provides a practical 9–10 hours* of operating time. With the new BC-190 charger, catch calls even during the night while charging the battery with the radio power on. * Typical operation Tx:Rx: Stand-by=5:5:90

Other features

• 128 memory channels with 8 zones
• Inversion type*1 voice scrambler built-in
• Optional VOX headsets available
• Optional GPS speaker-microphone
• Power ON password
• 8 DTMF autodial
• 8-character alphanumeric display
• Normal and priority scans
• 2-step power saver and 2-step low battery beep
• BIIS 1200 mode programmable
• Busy, repeater lockout functions
• BTL only version (no vibration alert and no voice recorder) and BTL/Vibration alert version (no voice recorder) available* 2
*1 Inversion type voice scrambler is not compatible with UT-109/UT-110 voice scrambler. UT-109/UT-110 cannot be physically installed into the radio.
*2 Not available in some countries. (Not available in the U.S.)